W38L System
The W38L linkage wiper system is the perfect solution when you want to make sure the wipers will cover as much of your windscreen as possible, using two overlapping sweeps.
The system powers two arms with a 610 mm / 560 mm arm/blade combination.
Showing all 10 results
Product categories
- No categories
Product categories
- No categories
- 38 Nm torque
- A strong drive system that powers up to 610 mm / 560 mm arms and blades
- Easily adjusted sweep angle 45-110°
- Enables overlapping sweep
- Dynamic parking can be changed from Left to Right
- Two speeds: 30 sweeps/min and 47 sweeps/min
- Voltage Input: 12 or 24 VDC
- CE approved, EMC protected.
- Driveshaft in stainless steel
- Insulated ground for metal, GRP, and wooden boats
- Pantograph or pendulum arms
-
W38L Linked Windscreen Wiper motor
A linked wiper system where one motor runs two W12 wiper arms. With this system, you can design a very efficient wiper system with an overlapping sweep.Select options
Threaded rod M8 – Wiper linkage system
The threaded rod in stainless steel is the link between the two shafts in our W38L boat windshield wiper system.Select options
Wiper arm – standard
A black windshield wiper arm in stainless steel for the wiper motors W10 and W12.Select options
Plate and shaft for W38L
This plate with a shaft is a necessary accessory when installing a parallell arm in a linked W38L wiper system.Select options
Extension tube
Extension tube in stainless steel for the W38L boat windshield wiper system. CC-measure 450-750 mm.Select options
Wiper arm with adjustable tip
Wiper arm with an adjustable tip for our wiper systems W10 and W12. The wiper arm is available in black or electropolished acid-proof stainless steel.Select options
Pantograph arm, slim
A slim and elegant pantograph arm in stainless steel with a j-hook connection. The wiper arm fits our ROCA W10, W12 and W38L wiper motor systems.Select options
Pantograph arm
Pantograph windshield wiper arm in electropolished or black painted stainless steel.Select options
Wiper blade zinc-plated steel
A wiper blade made of black painted zinc-plated steel. Natural rubber profile with stainless steel backer, including two adaptors to fit wiper arms with straight connection or J-hook connection.Select options
Wiper blade
A wiper blade in natural rubber and stainless steel with anti-glare painting. Suitable for ROCA wiper arms with a saddle width of 16 mm.Select options