W38L System
The W38L linkage wiper system is the perfect solution when you want to make sure the wipers will cover as much of your windscreen as possible, using two overlapping sweeps.
The system powers two arms with a 610 mm / 560 mm arm/blade combination.
- 38 Nm torque
- Powers up to 610 mm / 560 mm arms and blades
- Adjustable sweep angle: 45 – 110°
- Enables overlapping sweep
- Dynamic parking, left or right
- Two-speed: slow 35 sweeps/min; fast 55 sweeps/min
- Voltage Input: 12 or 24 VDC
- EMC tested
- Insulated ground for metal, GRP, and wooden boats
- Pantograph or pendulum arms
- Driveshaft in stainless steel
- Total: 9
-
W38L Linked Windscreen Wiper motor
A linked wiper system where one motor runs two W12 wiper arms. With this system, you can design a very efficient wiper system with an overlapping sweep.
-
Extension tube
This stainless steel extension tube is designed for the W38L boat windshield wiper system.
-
Pantograph arm, slim
This is a slim stainless steel pantograph arm with a J-hook connection. The slim design enables higher visibility. The wiper arm fits our wiper motors W10, W12, and W38L.
-
Plate and shaft for W38L
This plate with a shaft is a necessary accessory when installing a parallel arm in a linked W38L wiper system.
-
Threaded rod M8 for W38L
The threaded rod in stainless steel is the link between the two shafts in our W38L boat windshield wiper system.
-
Wiper arm with adjustable tip
Wiper arm with an adjustable tip for our wiper systems W10 and W12. Available in black or electropolished stainless steel.
-
Wiper blade
A windshield wiper blade in natural rubber and stainless steel with anti-glare painting. Suitable for ROCA wiper arms with a saddle width of 16 mm.
-
Wiper blade zinc-plated steel
A wiper blade constructed from black-painted, zinc-plated steel, featuring a natural rubber wiping profile reinforced with a stainless steel backer.
- Total: 9