Search:
Reseller:
| Roca Industry AB P.O. Box 693 Radiovägen 19 SE-135 26 Tyresö Sweden Tel: +46 8 448 73 20 Fax: +46 8 742 32 25 VAT no: SE556103390201 |
Flushing attachmentItem no: 401000
Closing part on pipe engine flushing attachment for outboard models 20HP-thru-V6´s and Mercruiser. I drive units incl. connector.
INSTALLATION INSTRUCTIONS:
Connect your rubber washer to the hose coupling.Install flushing attachment by mounting it from the front of the engine (engine in drive position). Rubber cups should cover water intake opening. Connect a water hose to water inlet on the flushing attachment (when flushing, do not use full pressure). Before flushing remove propeller and make sure that no person is standing close to the engine when operating. Shift into neutral gear then start engine. Do not operate outboards above 1200 rpm and MerCruisers above 600 rpm. Flush engine until water is clear then stop engine. Remove flushing attachment after use.
INSTALLATION INSTRUCTIONS:
Connect your rubber washer to the hose coupling.Install flushing attachment by mounting it from the front of the engine (engine in drive position). Rubber cups should cover water intake opening. Connect a water hose to water inlet on the flushing attachment (when flushing, do not use full pressure). Before flushing remove propeller and make sure that no person is standing close to the engine when operating. Shift into neutral gear then start engine. Do not operate outboards above 1200 rpm and MerCruisers above 600 rpm. Flush engine until water is clear then stop engine. Remove flushing attachment after use.